Designed for optical sorting in seed, grain and food-ingredient processing lines. The final configuration is selected around the incoming crop, target product quality, required throughput and connection to upstream and downstream equipment. Request a technical quotation based on your actual product and operating conditions.
For a useful quotation, provide the crop and variety, moisture range, incoming condition, target quality, required capacity, hours per day, site power and air supply, available footprint, dust-control requirements and the machines before and after this unit.
This equipment performs optical sorting. Selection should be based on the crop and its physical characteristics, impurity or defect profile, required output, operating hours and available plant utilities. A suitable configuration is confirmed after the application and process flow are defined.
For a useful quotation, provide the crop and variety, moisture range, incoming condition, target quality, required capacity, hours per day, site power and air supply, available footprint, dust-control requirements and the machines before and after this unit.
| Required throughput | Required throughput (t/h) — to be defined for the selected application for the specified crop, moisture, impurity profile and quality target. |
|---|---|
| Installed power / utilities | Installed power and utility demand — selected configuration to specify for the proposed configuration. |
| Dimensions and clearances | Overall dimensions, operating height and service clearances — provide in the final layout drawing. |
| Product-contact materials | Product-contact materials and wear parts — specify according to crop, hygiene and abrasion requirements. |
| Controls and safety | Control panel, sensors, automation and safety interlocks — list included and optional items separately. |
| Options and accessories | Crop-specific screens, rollers, sensors, aspiration, feeders or accessories — only where applicable to this machine type. |
| Line interfaces | Inlet/outlet sizes, conveying interfaces, aspiration connections and signal protocols — confirm against the line layout. |
| Cleaning and maintenance | Access doors, cleaning method, routine service points and recommended spare parts — include in the offer. |
For a useful quotation, provide the crop and variety, moisture range, incoming condition, target quality, required capacity, hours per day, site power and air supply, available footprint, dust-control requirements and the machines before and after this unit.
This equipment is selected for the defined process task in the line. Final performance depends on the actual crop, incoming condition, required output and confirmed selected configuration configuration.
Optical Color Sorter Machine for Seeds & Grain should be specified against a real process need rather than selected by name alone. Optical sorting may use colour or other visible characteristics detected by a sensor to separate acceptable product from defined defects. Results depend on product presentation, sensor arrangement, the sorting recipe and defect definitions. Set acceptance and rejection criteria using representative good product and defect samples, and agree how false rejects and missed defects will be measured.
Set acceptance and rejection criteria using representative good product and defect samples, and agree how false rejects and missed defects will be measured.
When preparing an enquiry for Optical Color Sorter Machine for Seeds & Grain, document the crop or variety, incoming condition, required output quality, operating schedule and upstream/downstream equipment. Moisture, impurity profile, product fragility or packaging may be important depending on the application. Suitability should be checked using a representative sample and measurable acceptance criteria.
Optical sorting may use colour or other visible characteristics detected by a sensor to separate acceptable product from defined defects. Results depend on product presentation, sensor arrangement, the sorting recipe and defect definitions.
This equipment is selected for the defined process task in the line. Final performance depends on the actual crop, incoming condition, required output and confirmed selected configuration configuration.
Plan Optical Color Sorter Machine for Seeds & Grain as part of the complete process rather than as an isolated item. Review infeed and discharge points, elevations, floor space, service clearances, cleaning access, guarding and control interfaces. Define dust extraction, air, water, heat or other utility connections before ordering where they apply.
Optical sorting may use colour or other visible characteristics detected by a sensor to separate acceptable product from defined defects. Results depend on product presentation, sensor arrangement, the sorting recipe and defect definitions. Set acceptance and rejection criteria using representative good product and defect samples, and agree how false rejects and missed defects will be measured.
Optical sorting depends on colour, surface defects, kernel size, feed-layer consistency and camera/sensor settings. Dust and overlapping kernels can reduce detection accuracy.
Set colour thresholds and defect criteria for each crop. During trials, inspect both rejected defects and good kernels discarded by mistake.
Detection depends on the optical system, crop, defect contrast and sorting settings. Product samples should be tested against the required acceptance criteria.
Camera settings, ejector timing, feed uniformity and product presentation all affect the result. Settings should be validated using representative material.
A consistent feed with excessive dust and foreign material removed generally helps optical detection and reduces unnecessary rejects. The exact upstream preparation depends on the crop.
This equipment is selected for the defined process task in the line. Final performance depends on the actual crop, incoming condition, required output and confirmed selected configuration configuration.