Home›Peas
Pea Processing
Pulses & Legumes

Pea Processing

A pea processing line should be planned around the incoming sample and the final product specification. Key considerations include removing pod and plant fragments, undersized or broken peas and stones while protecting kernel integrity for food, feed or seed use. These findings help determine whether pre-cleaning, aspiration, screening, density separation or optical sorting is appropriate. The final sequence and throughput should be confirmed using a representative sample and a written supplier offer.

Open catalogue

Typical stages in pea processing

Planning information only: capacity and configuration vary depending on the product and foreign-material profile.

01Receiving
02Pre-cleaning
03Separation
04Grading
05Sorting
06Storage
07Packaging

Equipment to consider for pea processing

Equipment for cleaning, grading, separation, optical sorting and handling.

DestonerSeparation

Destoner

Equipment for a defined process step; final setup depends on crop and target grade.

2–25 t/h↗
SEED PROCESSING GUIDE

Pea Processing: cleaning, separation and grading

A peas processing line should be planned around incoming material condition and the final product specification. Key considerations include removing pod and plant fragments, undersized or broken peas and stones while protecting kernel integrity for food, feed or seed use. The objective is to remove unwanted material without unnecessary loss of saleable product.

01 / PROCESS

Typical stages in a pea processing line

Planning starts with receiving, sampling and defining acceptance criteria. Depending on the sample, the line may use pre-cleaning, aspiration, screen grading, destoning or density separation, and optional optical sorting. Not every crop requires every stage; the sequence should be verified against the sample and final specification.

02 / EQUIPMENT

How to choose equipment for pea processing

A peas cleaning machine or other peas processing equipment should not be selected on capacity alone. Screen openings, airflow, feeding method, product-contact materials, access for cleaning and downstream connections all matter. Start by reviewing Air Screen Cleaning Machine, Destoner, Gravity Separator, then confirm the final configuration with the supplier using a representative sample and target grade.

03 / QUALITY

Quality factors in a pea processing plant

Incoming moisture, impurity profile, variation in seed or kernel size, and the intended food, feed, oil, spice or seed-market destination all affect equipment selection. Aggressive handling can increase breakage or losses, while insufficient separation may miss the target purity. Cleaning efficiency and saleable-product recovery should therefore be assessed together.

Technical checklist for pea processing

  • Incoming crop, moisture condition and impurity profile
  • Target grade, size range and acceptable level of broken or defective material
  • Required throughput, operating hours, packing needs and downstream interfaces

Pea processing may use different screening and grading stages depending on whether the product is for dry food, feed or seed.

When planning a peas processing plant or complete seed processing line, define capacity, product quality and acceptance criteria clearly to support an accurate project quotation. Confirm throughput, dimensions, utilities, accessories, installation, commissioning and warranty conditions in writing.

Key planning points for a reliable pea processing line

For pea processing, define the incoming product form, moisture condition where relevant, impurity profile, target purity and acceptable level of broken or defective material before selecting equipment. These details help determine not only the right machine, but also the sequence of equipment and inspection points across the line.

Pea processing may use different screening and grading stages depending on whether the product is for dry food, feed or seed. For pulses, kernel integrity, size grade and the acceptable broken fraction should be part of the buyer specification. Cleaning efficiency should be reviewed alongside saleable-product recovery. Testing the same representative sample helps establish realistic expectations for target purity, product losses and the adjustment range required.

When comparing quotations, document throughput assumptions, product-contact materials, dust extraction, access for maintenance and cleaning, conveying interfaces and the next packaging or processing step. Ask the supplier to confirm operating conditions and capacity using a representative sample.

Related equipment

Air Screen Cleaning Machine · Destoner · Gravity Separator · Optical Color Sorter

Frequently Asked Questions

Which impurities should be removed first when processing pea?

Inspect an incoming sample for stones, dust, husks, stems and other foreign material. The impurity profile can vary with harvesting and storage conditions.

How should pre-cleaning and fine cleaning be planned for pea?

Pre-cleaning removes coarse and light material, while fine cleaning targets smaller particles. Screen and airflow settings should be selected using a representative sample.

Does pea processing require grading or density separation?

That depends on kernel size, shape, density differences and the target quality. Sample testing helps identify useful separation stages and estimate product loss.

How is hourly throughput determined for pea?

Throughput planning considers moisture, impurity level, kernel characteristics, target purity and operating hours.

What should be checked before storing processed pea?

Check moisture, residual impurities, product integrity and the required quality. Storage conditions should suit the crop and its intended use.